Re-keying locks can sometimes be a pain, since you usually need to get a locksmith to do it for you. However, with Kwikset’s SmartKey technology, you can re-key a lock in under a minute. Here’s how to do it.
RELATED:How to Install and Set Up the Kwikset Kevo Smart Lock
For this guide, we’ll be using a Kwikset Kevo smart lock, but many newer Kwikset locks come with this same SmartKey technology. If you’re not sure about your own lock, take a close look at it and see if there’s a tiny oval hole next to the keyhole. If so, then it’s a SmartKey lock.
Before you get started, though, you’ll need a few things:
- The current key that goes with the lock.
- A Kwikset SmartKey tool (One should’ve came with your lock, but if not, you can buy one on Amazon).
- The new (or rather, old) key that you want to use instead. This must be a Kwikset key, as Kwikset and Schlage keys are totally different from one another (and won’t work in each other’s locks). So if the rest of your house uses Schlage keys…you’ll need a separate key for the Kevo, unfortunately.
Kwikset Smartcode 915 Installation And User Manual. Factory Reset × Hide Hide. Consult the Programming and Troubleshooting Guide on the SmartCode 915 page at www.kwikset.com. Page 3: Add User Codes. Mastercode For enhanced security, a mastercode may be used when adding and deleting user codes. For more information about the. Ok alarm all sorted, Sixwheeledbeast was right, the tampers needed resetting on the wireless devices. The only thing I was doing wrong was being too impatient with them, they take ages to initialize with the control panel. I left it for an hour it then allowed me to arm and disarm which cleared all errors. How do i reset the Visonic Powermax + Quickfit Wireless Intruder Kit to reset the unit to factory setting or change the passcode nd ccess code i think its still the info as it came with originaly as pre set in the unit. How to connect and reset a ZigBee Kwikset lock. To reset a ZigBee Kwikset lock. If the ZigBee Kwikset lock is not performing as expected, you may need to reset the device and reconnect it with the SmartThings Hub. Once reset, the lock is then ready to be reconnected with the SmartThings Hub. Follow the first set of instructions above to.
Start by inserting the original key into the lock and turning it clockwise 90 degrees.
With the key still in the lock, take the SmartKey tool and insert it into the small hole next to the keyhole. Push it in firmly and you might hear or feel a tiny click. After that, remove the SmartKey tool.
Next, without rotating the key lock, remove the key and then insert the new key. Make sure that it’s all the way in the lock.
From there, simply rotate the key 90 degrees counterclockwise. You’ll hear a definite click. At this point, the key and lock should be straight up and down.
Now, to make sure that the lock has successfully been re-keyed, keep the key in the lock and rotate it back 90 degrees clockwise. Then try to remove the key. If the key doesn’t come out, then the re-keying was successful.
After that you can rotate it back and remove the key. Make sure that the key can actually lock and unlock the door. Once you’ve confirmed that, you’re good to go!
READ NEXTResetting Powermax Installer Code For Kwikset
- › How to Fix a Slow or Unresponsive Mac
- › Windows 10’s Tablet Mode May Be Replaced With the Desktop
- › How to Quickly Switch Between Gmail Accounts on Android, iPhone, and iPad
- › How to Use the chmod Command on Linux
- › How Writers Can Use GitHub to Store Their Work